Product detail

Description

Multi-functional Small Agricultural Hammer Mill Grain Grinder

This grain grinder features compact structure and stable performance. Equipped with wear-resistant hammer pieces, it can crush various grains, such as grain, corn, bean, coffee beans, etc efficiently. The grinding thickness is adjustable to meet different feed demands. It runs with low noise and low energy loss, easy to operate and clean.

Electric, petrol, diesel models are available for home and small agricultural use.

Features

Compact & small size, easy to move and store

High crushing efficiency, fast processing

Multifunctional, works for corn, wheat, etc

Durable hammer blades, long service life

Low noise and low power consumption

Simple structure, easy to operate and maintain

Available in electric, petrol or diesel power

Adjustable grinding fineness

Stable running, not easy to block

Special to this machine

High-Strength Hammer Blades
High-Frequency Quenched Claws
Pure Copper-Coil Motor
High-Manganese Steel Grinding Ring & Sieve Screen (Coarseness/Fineness Selectable)

Specifications

Model	9F-21 Grain Mill
Supporting power	2.2kW
Productivity	≥250kg/h
Total Weight	27.5kg(without motor)
Power supply	220V50HZ
Packing Size	450*342*517

Working Princinpal

When the hammer mill starts, the motor drives the rotor and hammer blades to rotate at high speed inside the crushing chamber.

Raw materials like corn, grains, etc are fed into the crushing chamber from the feeding hopper. The fast-spinning hammer pieces continuously strike, beat and tear the materials into small particles. Under the combined force of impact, collision and friction between materials and the sieve plate, materials are ground to the required fineness.

Fine particles that meet the size standard pass through the mesh holes of the sieve and discharge out of the grain grinder.

Operation Instructions for Grain Grinder

Check the grain crusher before use

Inspect the hammer blades, screen mesh and fasteners to make sure all parts are tight and intact. Confirm the power supply matches the grain crusher’s voltage. Place the grinder on flat, solid ground to avoid shaking during operation.

Feed materials properly

Start the grinder first and let it run idle for 1–2 minutes. Then add dry grains slowly through the feeding hopper. Do not throw hard foreign objects like stones or metal into the chamber to prevent damage.

Adjust grinding fineness

Replace screen meshes with different hole sizes to control the thickness of finished feed. Smaller holes produce finer powder, while larger holes make coarser particles.

Running and discharging

Qualified crushed materials will automatically fall out from the discharge outlet. If blockage occurs, stop the machine immediately before clearing the stuck materials. Never put hands into the crushing chamber when the machine is powered on.

Shut down and maintain

Stop feeding raw materials first, wait until all materials inside are fully discharged, then cut off the power. Clean residual materials inside the machine after each use, and lubricate moving parts regularly to extend service life.